Project mechanical files and images¶

STL files (3D models)¶

The following STL files are used in this project.

Base_LED_and_cam_case.stl
Base_PIMKS.stl
Cover_80mm_Two_Fans.stl
LED_and_cam_case.stl

To preview these files, open them in a CAD viewer or slicer (e.g., PrusaSlicer, Cura, Fusion 360).

Print specification¶

Parameter	Value
Material	Black PETG
Layer thickness	200 µm
Infill	20%

PETG is required — do not substitute PLA. PLA softens above ~60 °C and may deform near fan exhausts or in warm enclosures. PETG provides adequate heat resistance and mechanical strength for all printed parts in this assembly.

Inspection checklist (before installation)¶

[ ] No layer delamination visible on any face
[ ] All mounting holes clear and unobstructed
[ ] No warping on base surfaces that contact the frame
[ ] Fan openings on Cover_80mm_Two_Fans.stl free of stringing or bridging defects
[ ] Camera and LED cutouts on LED_and_cam_case.stl clean and correctly sized